Brand Topeak Model 62002842 Details Lowest Price ($5.20)

Average Rating

Topeak Pressure-Rite Anti-Air Loss Connector
Topeak Pressure Rite Anti Air Loss Connector – Features
An anti-air-loss connector essential for air spring forks and shocks and the hard to reach valves on 12″ and 14″ wheels. The 90° tight-angle head fits into very tight spaces, and is Schrader valve compatible on both ends.
Anti-air-loss connector
Essential for air spring forks and shocks and the hard to reach valves on 12″ and 14″ wheels
The 90 degree tight-angle head fits into very tight spaces, and is schrader-valve compatible on both end
Schrader to Schrader adaptor

……………………………………………………………………………………………………………………………………….
Topeak Pressure Rite Anti Air Loss Connector – Reviews

My rear motorcycle tire stem is very difficult to reach due to the density of the spokes. I’ve used numerous methods to deal with this but none that I can say worked perfectly. Usually I had to use a special pump and then over-inflate the tire just knowing that I would lose a lot of air when taking it off. Not so with this product. It screws on easily and given the collar itself turns, you don’t need to worry about clearing the stem of the product. Once on you can connect it to your pump of choice and inflate. Removing the device does not yield any loss in pressure.

The only issue is that you cannot connect a tire gauge to this device to check pressure. You will need to use the gauge on the pump since it takes pressure to open the valve. I cannot, however, fault the device since that it what it’s made to do. Otherwise this very elegantly solved a long standing annoyance.

Great product!

Ronald Del Buono

I have an 8 inch tire on a bike trailer that has 1 inch clearance between the end of the valve and hub. Couldn’t find any pump to fit in that tight space so I just used it with the tire flat.

This little device just fits in that 1 inch clearance and allows any air pump to be attached. Obviously, the trailer rolls much better now.

The additional feature is that when the device is removed off the valve stem, there is virtually no air loss.

I’m extremely satisfied with it.

Lorinda S. Baldwin

. the adapter is genius: it has it’s own pressure sensitive valve inside;
give it a pump to engage it,
then your pump’s gauge’s reading will be true;
finally release your pump’s engage
and the adapter quickly releases pressure on the tire’s stem valve .
. now easily unscrew the adapter .
. the adapter screws on easily, and has a rock-solid connection .
. they advertise it as getting into tight places,
and providing exact pressures;
but, it’s also doing well at an additional use case:
since it’s the pump’s pressure that sets the adapter’s stem depressor,
the pump’s stem depressor never gets worn out .
. also, since the adapter’s stem depressor is metal,
it never gets worn out either !

Charles Arvey

I purchased a Viair compressor and based on the comments purchased this as a quick fill in order to avoid having to screw on the compressor to the valve stem. This does not work as described, air leaks everywhere from this and does not have a good seal on the valve stem. Save your money

MGI


More…